Energy management, BMS and energy audits
We find where energy is wasted, fix it through the control system and prove the savings: audits, BMS, energy management systems and control-based efficiency for buildings, plants and utilities.
See what our measures do to a building's energy
Pick a facility, then switch measures on. The model runs a simulated day: equipment turns from red to green, the load profile drops and the yearly savings update.
Illustrative model using typical UAE savings ranges. Your figures come from the audit.
24-hour load profile
Before AfterThe shaded band is the energy saved. The vertical line follows the simulated clock.
Savings potential by measure
MWh per year for the selected facility; measures switched off are greyed.
Illustrative figures: AED 0.40 per kWh and 0.40 t CO2 per MWh. Savings from combined measures are less than the sum of each measure alone, and the model accounts for that.
Audits that end in a costed action plan
Following the ASHRAE audit levels, from a quick walk-through to an investment-grade audit with a measurement and verification plan.
Level 1: walk-through
Utility bill and tariff analysis, a site walk-through and a list of low-cost measures with rough savings.
Level 2: detailed audit
Metering and data logging, end-use breakdown, and costed energy-saving measures with savings and payback.
Level 3: investment grade
Detailed engineering, sub-metered baselines and a measurement and verification plan for performance contracts.
Savings that come from the control system
Most energy is wasted by equipment running when it does not need to, or harder than it needs to. A well-engineered BMS and energy management system fixes that every hour of every day.
Building management systems
- BACnet/IP, Modbus, KNX and LonWorks integration
- Chillers, AHUs, FCUs, pumps and lighting control
- Scheduling, set-point resets and demand limiting
- Alarms, trends and graphics to ISA-101 style
- Fire alarm, access control and CCTV interfaces
- Links to plant SCADA, PMS and solar PPC
Energy management systems
- Sub-metering of every main feeder and end-use
- Live energy dashboards and monthly KPI reports
- Peak demand and power factor monitoring
- Energy performance indicators and baselines
- Processes aligned with ISO 50001
- Tariff and bill validation against DEWA, ADDC and SEWA slabs
Measures we design, install and control
Each measure is engineered into the control system, so the saving keeps happening after we leave site.
BMS optimisation
Scheduling, set-point resets and night set-back so plant runs only when needed.
Chiller plant optimisation
Sequencing, condenser and chilled water resets, and kW/TR tracking.
Variable speed drives
VFDs on pumps, fans and compressors, controlled from the real demand.
Lighting and controls
LED retrofits with occupancy, daylight and time-based control.
Power factor and quality
Capacitor banks and filters to cut losses, penalties and peak demand.
Solar and storage
Rooftop PV under Shams Dubai or D33, with batteries where the tariff rewards it.
How a saving project runs
Audit
Measure the baseline and find the savings
Design
Engineer the measures and the controls
Implement
Install, programme and commission
Verify
Measure savings against the baseline (IPMVP)
Sustain
Dashboards, alarms and periodic re-tuning
Energy, power management and demand-side work
Power management, hybrid control and demand-side management, delivered and in tender.
Solar, PPC and DEWA D33- 45 MW HFO power plant: complete E, I & C and DCSSABSON for BECO, Somalia, 2026Awarded
- 40 MW hybrid solar plant: SCADA, CCTV, communications and electrical worksATGC / GSU, Mocha, Yemen, 2025-2026In progress
- Two power plants, TCF and camp: SCADA and power managementADNOC / Tecnimont, Hail and Ghasha development, UAE, 2024-2025Completed
- Two power plants interconnected: SICAM power managementSEPOC, Block 18, Yemen, 2021-2022Completed
- On-grid PMS: 2.2 MWp PV, 1.5 MW battery and three gensetsDome Advanced Electromechanical Works, UAE, 2026In progress
- Alraja gas plant synchronisation and PMSSEPOC, Block 18, Yemen, 2026In progress
Book an energy audit
Send twelve months of utility bills and the site details. We will tell you where the savings are and what they are worth.